Overview
|
Like its predecessor, Summa DC3 Plus, the new 54-inch, 8-color Summa DC4 prints images that are guaranteed outdoor-durable for up to 5 years without lamination. And of course, auto ribbon changing and ultra precise contour cutting are built right in. But our 4th generation DC-class printer does so much more. It accepts variable width media from 24 to 54 inches wide. And it has a host of new printing modes for higher resolution, faster printing and for printing on specialty films, including banner material. $19,999.00 |
|
Vibrant outdoor graphics that never need UV lamination, die-cut and ready-to-install
What good is print and cut if you have to laminate? Not much, for what many sign companies do most: permanent signs and vehicle graphics. That's the real difference between thermal resin and every other type of printing. With thermal transfer, images are installation-ready. So you just print, weed and apply.
Best of all, the new Summa DC4 is just as affordable as our older Summa DC3 Plus. Only $19,995, including our blazing-fast ColorControl RIP software.
|
Key Features
Prints and cuts up to 50.2 inches wide
Contour-cuts at up to 24 inches per second
Auto-exchanges up to 8 colors
ColorControl RIP software for Windows 304x304 and 304x609 dpi print resolutions
Variable width media from 24 to 54 inches
Process, spot-color and metallic printing
Double-density mode for back-lit signs |
|
|
Specs
| Model |
Summa DC4 |
| Width | 54" (140 cm) |
| Speed | Printing:
93 Ft2/hour (8.7 m2) — Spot;
34 Ft2/hour (3.2 m2) — Process CMY
Cutting:
24 inches-per-second (600 mm/sec) max |
| Method | Printing:
Thermal transfer, using outdoor-durable process and/or spot color resin ribbons, and; metallic gold and silver polyester ribbons (indoor use)
Cutting:
Drag-knife, using standard Summa D-Series blades |
| Resolution | Printing:
609 x 304 dpi (24 x 12 dpmm) maximum hardware;
609 x 609 apparent dpi (24 x 24 dpmm) software
Cutting:
0.001" (0.025 mm), 0.005" (0.1 mm) selectable |
| Media width | Variable width from 24 - 54 inches (61cm - 137cm);
Recommended widths:
24, 36 or 54 inches (61, 76 or 137 cm) |
| Production width | Printing:
Up to 50.2 inches wide (127.5 cm)
Cutting:
Up to 50.2 inches wide (127.5 cm)
|
| Media loading | Auto alignment system built-in |
| Media drive | Summa OptiTrac™ active-steering drive using variable-position traction-feed pinch rollers |
| Media tracking | Optical laser tracking system built-in |
| Media supply | Motorized media supply and take-up rollers built-in |
| Memory | RAM (cache):
64 MB
Hard disk (reprint storage):
2 GB |
| Interface | USB 2.0 and Centronics parallel |
| Baud rate | USB 2.0: (1.5Mbps & 12Mbps);
Parallel: up to 38,400 baud |
| File support | EPS, PDF and all generic PostScript |
| Power requirements | Connection: standard USA power outlet;
Requirement: 100-240 Vac, 48-62 Hz, 85 VA max |
| Operation environment | 60°F to 90°F (15°C to 32°C), 35% to 80% relative humidity, non-condensing |
| Dimensions | Shipping:
100.8" x 35" x 63" (256 x 88 x 160 cm);
Equipment:
90.6" x 24.8" x 51.2" (230 x 63 x 130 cm) |
| Weight | Shipping:
800 Lbs (360 kg);
Equipment:
550 Lbs (250 kg) |
| Warranty (USA) | Printer:
1 year parts and labor limited warranty
Images:
Up to 5 years, outdoors, without lamination; restrictions may apply for desert areas or exposure to harsh chemicals or abrasives. |
| Support policy (USA) | Unlimited toll-free technical support for the life of the equipment (transferable) |
|
|
|
|
